Hiring a remote senior engineer from Central Europe: time zones, contracts, VAT and cost
The simplest way to hire a senior engineer in Slovakia is a B2B contract with my company, invoiced in euros. EU business clients pay no Slovak VAT (reverse charge), UK and US clients are outside EU VAT, and UK off-payroll rules generally don't reach someone who lives and works outside the UK. The one clause worth an hour with a lawyer is who owns the code: under Slovak law copyright can't simply be "assigned" as English and US templates assume, so the contract has to use the Slovak route instead.
My working day starts at 9:00 Central European Time. In November that is 8:00 in London, 3:00 in New York and 19:00 in Sydney. Those three numbers decide more about whether a remote engineer works out for you than anything on a CV, so I’ll start with them and then go through the paperwork: the contract, VAT, IR35, the forms a US finance team asks for, and the clause about who owns the code.
A fair warning: I’m the engineer this article is about, so read it with that in mind. I’m also not a lawyer or a tax adviser. Every rule below links to the official text it comes from, and your accountant gets the last word.
The hours you actually share
I work 9:00 to 19:00 Central European Time. Slovakia changes its clocks with the rest of the EU, so the gap to London or Berlin never moves. Here is what that day looks like from your office, in November, when everyone is on winter time:
| Your office | My 9:00–19:00 is your | Overlap with your 9-to-5 |
|---|---|---|
| London, Dublin, Lisbon | 8:00–18:00 | the whole day |
| Berlin, Amsterdam, Paris, Warsaw | 9:00–19:00 | the whole day |
| New York, Toronto | 3:00–13:00 | 4 hours, 9:00 to 13:00 |
| San Francisco, Vancouver | 0:00–10:00 | 1 hour |
| Sydney, Melbourne | 19:00–5:00 | none |
For Europe and the UK this is a non-question. For the US East Coast, four hours is enough for a stand-up, a review session and questions answered the same day. It works if the work is written down: tickets that say what “done” means, pull requests with a description a person can read in the morning, decisions in a message and not only in a call. I’d say that matters more than the hours.
From July 2022 to July 2023 I worked remotely for Lokalise, a localization company based in Riga, which is one hour ahead of me. One hour is nothing, so I won’t claim that year taught me much about bigger gaps. It was remote work all the same, including code review and design discussions with product and SRE.
Two traps with the US. First, the clocks don’t change on the same day: the EU moves them on the last Sunday of March and October, the US on the second Sunday of March and the first Sunday of November. For a week or two each spring and autumn the gap to New York is five hours instead of six. In 2026 that is 25 October to 1 November, in 2027 from 14 to 28 March. Calendar invites survive this; “let’s meet at my 15:00” does not. Second, the West Coast gets one shared hour at best, so a team in San Francisco should plan for async work and one regular call.
Australia has no shared office hour with Europe, and I won’t pretend otherwise. It can still work: you write before you leave, I work while you sleep, and you wake up to a pull request. For a regular call I can take an early slot in my morning, which lands in your evening: 8:00 my time is 18:00 in Sydney in November.
On language: my English is B2 on the European scale (CEFR). In practice I write specs, pull requests and documentation in English every day and run calls in it without trouble. I’m not a native speaker and you’ll hear that.
Contractor, platform or Employer of Record
There are four ways to put a person in Slovakia on your books. I’ve said yes to all four, so this is about what’s easiest for you, not what I’d prefer.
| Model | Who signs with me | What you pay | Admin on your side |
|---|---|---|---|
| B2B contract with my company | You and Fellow Bytes s.r.o. | One invoice a month, in euros | Lowest: pay the invoice, reverse charge in your VAT return |
| Freelance platform (Upwork, Deel contractor) | Through the platform | The platform’s invoice, including its fee | Low: the platform holds the contract and payments |
| Employer of Record (EOR) | An EOR company employs me in Slovakia | Salary, Slovak employer contributions and the EOR’s fee | Low, but the most expensive option |
| Direct employment | Your company | Salary and contributions | Highest: you run Slovak payroll for one person |
An Employer of Record is a company that legally employs someone in their country on your behalf. It runs the payroll, pays the social and health insurance, and you direct the work. It exists for companies that want an employee, not a supplier, without opening an office. It is also the right choice if your own policies don’t allow long contractor engagements.
The B2B contract is the one I’d suggest as the default. My company is Fellow Bytes s.r.o., a Slovak limited company (company ID 55274307), registered for EU VAT. You get one invoice a month, there are no employer contributions, and we agree the notice period ourselves.
What I offer, in plain numbers: from €70 an hour, or €560 a day. Full-time as a contractor, part-time (a few days a week as a fractional senior), a fixed-price project or a monthly retainer, with no minimum. I can start within two weeks, come to your office in the EU now and then, and for the right role I’d consider relocating with your help.
To give you a rough sense of a full month, the plain arithmetic is 21 working days × €560 = €11,760. That’s the published day rate times the days, not a quote; for a long full-time engagement we’d agree the monthly figure together. Either way there’s no Slovak VAT on it if you are a business abroad, and nothing on top for contributions, holidays or equipment.
VAT, IR35 and the US forms
This is the part people worry about, and most of it is simpler than it sounds.
Start with a business in another EU country. Under the EU VAT Directive, a service supplied to a business is taxed where the customer is established (Article 44), and the customer pays that VAT, not the supplier (Article 196). So my invoice to a company in Germany or the Netherlands has no Slovak VAT on it and says “Reverse charge”, which Article 226(11a) requires. Your accountant records the VAT in your own return and in most cases deducts the same amount in the same return, so it nets to zero. Before the first invoice I check your VAT number in the Commission’s VIES database, and Fellow Bytes reports the sale to the Slovak tax office in its recapitulative statement (Article 262). If your company has no EU VAT number, tell me before the first invoice, because then the rules are different.
A business in the UK is the same idea under a different law. Since Brexit the UK is outside the EU VAT system. For my side, a service to a UK business is supplied where the customer is, so no Slovak VAT. On your side, HMRC’s Notice 741A, section 5, says the UK customer accounts for the reverse charge: “You, the customer, must act as if you are both the supplier and the recipient of the services.”
Then IR35. Since 6 April 2021, a medium or large UK company that hires a contractor through the contractor’s own company has to decide whether the person is, in substance, an employee (the “off-payroll working rules”, still widely called IR35). HMRC’s own manual answers the cross-border case directly. ESM10025: “A worker who is not UK-resident and is performing work outside the UK is unlikely to fall within the charge to UK tax or NICs. If the worker is not chargeable to UK tax or NICs, then the off-payroll working rules will not apply.” The same page says the residence of the worker’s company doesn’t matter, so the question is about me, not about Fellow Bytes. And per ESM10006, a client with no UK residence or UK permanent establishment doesn’t have to consider the rules at all. If I came to work in your London office for weeks at a time, that would be a reason to look again.
A company in the US has no VAT to deal with. Your finance team will ask for a Form W-8BEN-E, the IRS form a foreign company fills in to document that it is foreign. The IRS rule on personal services is that the place where the work is performed decides the source of the income. Work done in Slovakia is foreign-source income, which generally means no US withholding on my invoices. Fellow Bytes pays its taxes in Slovakia.
For Australia I invoice without Slovak VAT too. Whether you owe GST on an imported service depends on your own registration, so that one goes to your accountant.
Last, money itself. I invoice in euros, which is Slovakia’s currency. If you pay in pounds or dollars, the exchange rate is on your side of the transfer, and it’s worth agreeing up front who pays the bank fees.
Who owns the code: the clause to check
This is where I’d spend the lawyer’s hour, and I rarely see it in hiring guides.
English and US contracts usually say the contractor “assigns” all intellectual property to the client. Under Slovak copyright law that sentence doesn’t quite work. The Slovak Copyright Act (185/2015) says that the author’s economic rights “are non-transferable” (§ 20(2)). You can’t buy them outright the way you can in the UK or the US. You get a licence, or, in the case that matters here, the right to exercise them.
The case that matters is employee work. Under § 90 of the same act, a work created by an employee, or by a member of a company’s statutory body, as part of that role is an “employee work”. The company then exercises the economic rights in its own name (§ 90(4)), and it “may assign the right to exercise the author’s economic rights to a third party” (§ 90(5)). So the chain for code I write for you is: I write it as part of my work for Fellow Bytes, Fellow Bytes exercises the rights, and our contract assigns that exercise to you once the invoice is paid.
In practice, ask your lawyer to make the IP clause say three things: that the supplier assigns the exercise of all economic rights to the work, as Slovak law allows; that where an assignment isn’t possible under applicable law, the client gets an exclusive, perpetual, worldwide, transferable and sublicensable licence instead; and what happens to tools and code I had before the project and to open-source libraries, which stay under their own licences. Your template’s waiver of moral rights is unenforceable under Slovak law (§ 18(3)), which costs you nothing; nobody’s name is going on your source code.
A checklist before you sign
None of this needs me. You can run it with any contractor in the EU.
- Put your team’s working hours next to theirs in the same month, and mark the weeks in March and October or November when the US gap is five hours instead of six.
- Decide which model you want: B2B contract, platform, Employer of Record or employment. If your policy forbids long contractor engagements, it’s EOR.
- Get the contractor’s company name, company ID and EU VAT number, and check the VAT number in VIES before the first invoice.
- If you’re in the EU, make sure the invoice says “Reverse charge” and carries both VAT numbers. If you’re in the UK, account for the reverse charge under Notice 741A. If you’re in the US, ask for a W-8BEN-E.
- If you’re a medium or large UK company, write down in the file why the off-payroll rules don’t apply (non-UK resident, working outside the UK, ESM10025), and revisit it if that changes.
- Agree the currency, payment terms and who pays bank fees, and run a small first invoice to test the payment route.
- Have the IP clause checked against the contractor’s country. For Slovakia: assignment of the exercise of economic rights, a licence as fallback, and a line about pre-existing code and open source.
- Agree how work is written down: where tasks live, what a pull request must say, and when the shared hours are.
If you are hiring for a role like this now, my about page has the CV and how I work, and the web apps and SaaS page shows what I build end to end, with case studies like FyzioDesk and Canteen. Send me the role, the hours you need covered and your start date through the contact form. I can start within two weeks, and I’ll tell you on the first call if the hours don’t fit.
Sources
- Council Directive 2006/112/EC on the common system of VAT (Articles 44, 196, 226 and 262), EUR-Lex
- Your Europe: cross-border VAT for services to business customers (last checked 13 July 2026)
- European Commission: VIES VAT number validation
- HMRC VAT Notice 741A: place of supply of services, section 5 on the reverse charge (updated 29 September 2022)
- HMRC Employment Status Manual ESM10025: off-payroll working, international issues (updated 7 October 2026)
- HMRC Employment Status Manual ESM10006: medium or large clients and wholly overseas clients (from 6 April 2021)
- IRS: Instructions for Form W-8BEN-E
- IRS: source of income, personal service income
- Slovak Copyright Act No. 185/2015 Coll. (§ 18, § 20 and § 90), Slov-Lex
- Directive 2000/84/EC on summer-time arrangements (EU clock changes)
- 15 U.S. Code § 260a: advancement of time (US daylight saving time)